| 230.20.0600.503 Type 21/750. Standard 5 Slewing Ring Bearings | Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Material:Wrapped bronze with; Bearing Bore after Mounting (di) - 210 +0.115 / -0:210 +0.115 / 0; OD Chamfer Length (Co):1.800; ID Chamfer Angle (B deg.):45; Shaft Size (ds) - 205 -0.170 / -0.216:205 0.170 / 0.216; Bearing Type:straight; Bore Diameter (mm):205; Bearing Length, Nominal (B):70.000; Housing Bore Dia. (Dh) - 210 +0.046 / -0:210 +0.046 / 0; |
| 161.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):870; C:310 mm; Size (mm):480x870x310; Bore Diameter (mm):480; d:480 mm; D:870 mm; Width (mm):310; B:310 mm; Bearing number:23296 KW33; |
| A19-150P1 Rotek Slewing Ring Bearings | Bearing number:VEX 120 /NS 7CE1; d1:141,4 mm; D:180 mm; dh:9,6 mm; Da max.:171,2 mm; C:28 mm; Bore Diameter (mm):120; B:28 mm; r3 min.:1 mm; Width (mm):28; (Grease) Lubrication Speed:11 200 r/min; db min:128,8 mm; rb max.:1 mm; d:120 mm; Size (mm):120x180x28; D1:158,61 mm; Db max:174,4 mm; Basic dynamic load rating (C):57,2 kN; r4 min.:1 mm; a:34 mm; |
| 281.30.0975.013 Type 110/1100.1 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:6.6 kN; Outside Ring Width B:14.000 mm; Bore Size d:17 mm; Grease Reference Speed:15000 rpm; Oil Reference Speed:22000 rpm; Features:O.D. Groove; Clearance:C3; Weight:0.12 Kg; Cr - Dynamic Load Rating:13.6 kN; Outside Diameter D:47.000 mm; Radius Rs min:1.000 mm; |
| 61.20.0400.101.21.1503 Standard 5 Slewing Ring Bearings | B:80 mm; S2:8,6 mm; C:150 mm; T:25 mm; Weight:3,2 Kg; W:102 mm; Thread (G1):M10; A:20 mm; L:180 mm; F:78 mm; G:62 mm; Bearing number:SCW 40-UU; d:40 mm; Bore Diameter (mm):40; Basic dynamic load rating (C):3,5 kN; h:40 mm; K:11 mm; |
| 3R16-265N3 Rotek Slewing Ring Bearings | Da max.:56,5 mm; Weight:0,25 Kg; r2 min.:1 mm; ra max.:1 mm; D:62 mm; Y0:0.99; a(mm):14.8; Bearing No.:33007; Y1:1.80; rb max.:1 mm; Bearing number:33007; da min.:40,5 mm; da max:41 mm; d:35 mm; Basic static load rating (C0):53,8 kN; Oil lub.:8200; Calculation factor (e):0,33; Da min:55 mm; (Oil) Lubrication Speed:8200 r/min; Cu:7.70; |
| 232.20.0500.503 Type 21/650.2 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):280; Bearing number:6256 M; Basic static load rating (C0):588 kN; d:280 mm; Outer Diameter (mm):500; D:500 mm; (Grease) Lubrication Speed:1683 r/min; Basic dynamic load rating (C):414,6 kN; Weight:71 Kg; Width (mm):80; Size (mm):280x500x80; B:80 mm; C:80 mm; |
| 162.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | T:101,6 mm; Outer Diameter (mm):499,948; d:304,8 mm; D:499,948 mm; Basic dynamic load rating (C):1140 kN; Bore Diameter (mm):304,8; B:79,375 mm; a:105,4 mm; Weight:66,1 Kg; (Grease) Lubrication Speed:280 r/min; Size (mm):304.8x499.948x101.6; C:53,975 mm; Width (mm):101,6; Bearing number:M959442/10; Basic static load rating (C0):1970 kN; |
| No. | Brand | d | M | R | X | c | P | U | D |
| 231.20.0600.013 Type 21/750.1 | Standard 5 | 85 mm | - | - | - | - | - | - | 150 mm |
| 162.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 2.3750 in |
| 62.25.1155.500.11.1503 | Standard 5 | 130 mm | - | - | - | - | - | - | 220 mm |
| 161.20.0630.891.21.1503 | Standard 5 | 40 mm | - | - | - | - | - | - | 62 mm |
| 61.20.0400.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | 110 mm |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0600.503 Type 21/750.1 | Standard 5 | 630 mm | - | - | - | - | - | - | 780 mm |
| 61.20.0630.100.11.1503 | Standard 5 | 70 mm | - | - | - | - | - | - | 150 mm |
| 61.25.1120.001.21.1504 | Standard 5 | 12 mm | - | - | - | - | - | - | 28 mm |
| 3R16-265E1 | Rotek | 36 mm | - | - | - | - | - | - | 40 mm |
| 62.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.22.0660.001.11.1503 | Standard 5 | 70 mm | - | - | - | - | - | - | 125 mm |
| 230.20.0800.013 Type 21/950. | Standard 5 | 110 mm | - | - | - | - | - | - | 150 mm |
| 230.21.0575.013 Type 21/650. | Standard 5 | 260,000 mm | - | - | - | - | - | - | 480,000 mm |
| 60.22.0370.301.11.1504 | Standard 5 | 41,275 mm | - | 2 mm | - | - | - | - | 85 mm |
| 231.20.0800.503 Type 21/950.1 | Standard 5 | - | - | - | - | - | - | - | 240 mm |
| 62.20.0630.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | 28 mm |
| 162.16.0400.890.11.1503 | Standard 5 | 95,25 mm | - | - | - | - | - | - | 209,55 mm |
| 231.21.0575.013 Type 21/650.1 | Standard 5 | - | - | - | - | - | - | - | 420 mm |
| 231.21.0775.013 Type 21/850.1 | Standard 5 | 55,5625 mm | - | - | - | - | - | - | 100 mm |
| 230.20.0700.013 Type 21/850. | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.1180.890.11.1503 | Standard 5 | 95,25 mm | - | - | - | - | - | - | 136,525 mm |
| 281.30.1100.013 Type 110/1300.1 | Standard 5 | 120 mm | - | - | - | - | - | - | 165 mm |