| A16-86P1 Rotek Slewing Ring Bearings | Fatigue load limit Pu:19.3 kN; r1,2 min.:5 mm; B:90 mm; Da max.:582 mm; ra max.:4 mm; Limiting speed:1100 r/min; d2 ≈:441 mm; d:400 mm; da min.:418 mm; Calculation factor X:0.35; Basic dynamic load rating C:527 kN; Calculation factor e:1.14; Calculation factor Y2:0.57; Reference speed:1000 r/min; Db max.:591 mm; D:600 mm; Calculation factor A:17.5; rb max.:2 mm; Calculation factor kr:0.083; r3,4 min.:2 mm; |
| A14-24P1A Rotek Slewing Ring Bearings | J min.:295.275 mm; J max.:333.375 mm; Cap bolt recommended tightening torque:515.2 N·m; P120°:39.1 kN; da:71.438 mm; Labyrinth ring:2 x LOR 182; Ca:69.799 mm; A1:111.125 mm; H1:114.3 mm; J1:60.325 mm; Cap bolt, SAE grade:8; Max. speed for PosiTrac Plus seal:1950 r/min; P90°:62.3 kN; P150°:35.6 kN; RG:3/8 NPT; PG:1/8 NPT; PosiTrac Plus contact element:2 x B10724-164; Da:180 mm; P180°:42.7 kN; |
| A16-78E4 Rotek Slewing Ring Bearings | Sealed Speed Rating n3:4900 rpm; Basic Static Radial Load Rating Co:31000 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:55300 N; Accessories:Two Seals; B:25.00 mm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; |
| R8-39E3 Rotek Slewing Ring Bearings | l2 max.:107 mm; Material constant KM:330; dk:29 mm; h:78 mm; Basic static load rating C0:42.5 kN; Mass rod end:0.32 kg; d:20 mm; r1 min.:0.3 mm; l1 min.:43 mm; Basic dynamic load rating C:30 kN; l7 min.:24 mm; C1 max.:13.5 mm; B:16 mm; Specific dynamic load factor K:100 N/mm²; α:9 °; d2 max.:54 mm; G:M 20x1.5; |
| RKS.060.30.1904 SKF Slewing Ring Bearings | da max.:303 mm; Da max.:458 mm; d:260 mm; r5 min.:1.5 mm; b:35 mm; Fatigue load limit Pu:600 kN; D:480 mm; Calculation factor Y0:1.6; 2B:260 mm; Mass bearing pair:213 kg; Limiting speed:1200 r/min; K:16 mm; Calculation factor Y2:2.3; r3,4 min.:5 mm; Reference speed:750 r/min; Ca min.:10 mm; Calculation factor e:0.43; Basic dynamic load rating C:4013 kN; Basic static load rating C0:7350 kN; ra max.:1.5 mm; |
| L9-38N9Z Rotek Slewing Ring Bearings | Static axial stiffness, preload class C:55 N/µm; Basic dynamic load rating C:14.3 kN; Attainable speed for grease lubrication:32000 r/min; Calculation factor f2C:1.05; Preload class A GA:50 N; r3,4 min.:0.3 mm; Calculation factor f2D:1.09; r1,2 min.:1 mm; db max.:37.2 mm; Static axial stiffness, preload class A:30 N/µm; da min.:34.6 mm; Calculation factor f0:9.4; Da max.:50.4 mm; Preload class D GD:400 N; |
| S16-112E1 Rotek Slewing Ring Bearings | B:100 mm; Da max.:279 mm; b:8.3 mm; G1:18 mm; Calculation factor e:0.31; G:M 200x3; Calculation factor Y2:3.3; ra max.:2 mm; da min.:197 mm; Fatigue load limit Pu:163 kN; d2 ≈:210 mm; Reference speed:1400 r/min; Calculation factor Y0:2.2; Calculation factor Y1:2.2; Basic static load rating C0:1800 kN; B2 ≈:131 mm; Limiting speed:2000 r/min; d1:180 mm; Mass bearing + sleeve:27.5 kg; Basic dynamic load rating C:1164 kN; |
| A6-14E1 Rotek Slewing Ring Bearings | L:711.2 mm; h:57.15 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; da:198.438 mm; Cap bolt recommended tightening torque:1735.4 N·m; R1:120.65 mm; PG:1/4 NPT; P60°:416 kN; A1:190.5 mm; P150°:136 kN; P180°:160 kN; Mass pillow block:214 kg; Cap bolt:1 1/8-7 UNC; RG:1 NPT; Da:339.999 mm; Cap bolt, SAE grade:8; Stabilizing ring:2 x 36053-140; P90°:249 kN; Pa:59.6 kN; |