60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings | Material:Carbon steel shell w; Average Clearance (Cd):0.0048; OD Chamfer Length (Co):0.072; Bore Diameter (mm):152,4; Shaft Dia., Nominal (d):6.0000; Bearing Length, Nominal (B):4.750; Shaft Size (ds) - 6:5.9975; ID Chamfer Length (Ci):0.031; Bearing Bore after Mounting (di) - 6.007:6.0002; Wall Thickness (S3):0.095; Bearing number:AST50 96IB76; Housing Bore Dia. (Dh) - 6.1874:6.1858; ID Chamfer Angle (B deg.):30; |
3R16-245N1 Rotek Slewing Ring Bearings | L:30 mm; Bearing number:UCTX06; E:89 mm; F:17,5 mm; Q:37 mm; d:30 mm; B:42,9 mm; P:64 mm; Bore Diameter (mm):30; H:129 mm; J:37 mm; K:12 mm; R:16 mm; S:22 mm; H2:64 mm; H1:78 mm; A:102 mm; G:15 mm; |
231.20.0800.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | N:20 mm; J:171 mm; H2:126 mm; d:49,625 mm; Basic static load rating (C0):29,4 kN; A:73 mm; Bearing number:UCPX10-31; Basic dynamic load rating (C):43,4 kN; H:63,5 mm; L:241 mm; S:22,2 mm; Bore Diameter (mm):49,625; H1:22 mm; Weight:4,6 Kg; Width (mm):55,6; B:55,6 mm; Bolt (G):M16; L1:76 mm; N1:36 mm; |
60.20.0844.575.01.1403 Standard 5 Slewing Ring Bearings | Bearing Bore after Mounting (di):20.131 / 20.050; ID Chamfer Angle (B deg.):30; Wall Thickness (S3):1.460; Material:Carbon steel shell w; Bearing Length, Nominal (B):20.000; Bearing number:AST20 2020; Bearing Type:straight; Shaft Dia., Nominal (d):20.0000; Bore Diameter (mm):20; OD Chamfer Length (Co):0.700; Lube Hole Dia. (dl):4.000; Housing Bore Dia. (Dh) - 23 +0.021 / -0:23 +0.021 / 0; ID Chamfer Length (Ci):0.500; |
S22-140E1 Rotek Slewing Ring Bearings | Category:Thrust Roller Bearin; m:165 g / Weight; C0r:41500 N / Static loa; dw:35 mm / Tolerance: E; C2:9 mm; Minimum Buy Quantity:N/A; Cur:7300 N / Fatigue lim; Ca:39000 N / Dynamic lo; C0a:101000 N / Static lo; Weight / LBS:0.346; C1 - 12 mm / Tolerance: -0,2:12 mm / Tolerance: 0; Overall Height with Aligning Washer:0 Inch | 0 Millimete; Width (mm):30; Cua:9500 N / Fatigue lim; Bore 1:1.378 Inch | 35 Mill; |
62.20.0560.001.21.1503 Standard 5 Slewing Ring Bearings | Shaft Dia., Nominal (d):85.0000; Shaft Size (ds) - 85 -0.120 / -0.155:85 0.120 / 0.155; Housing Bore Dia. (Dh) - 90 +0.035 / -0:90 +0.035 / 0; Bearing Outside Diameter, Nominal(Do):90.000; Bore Diameter (mm):85; ID Chamfer Angle (B deg.):45; Outer Diameter (mm):90; Material:Wrapped bronze with; OD Chamfer Length (Co):1.800; Bearing Bore after Mounting (di) - 85 +0.087 / -0:85 +0.087 / 0; Wall Thickness (S3):2.500; |
62.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | s:8 mm; H2:65,7 mm; J:95 mm; Bearing number:USPP206; L:117,5 mm; Basic dynamic load rating (C):19,5 kN; Bore Diameter (mm):30; Weight:0,6 Kg; A1:25,5 mm; B1:30 mm; N:11 mm; H:33,3 mm; H1:3,6 mm; A:37,5 mm; d:30 mm; |
230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings | dk:534 mm; Bore Diameter (mm):420; Outer Diameter (mm):600; Angle:2 °; C:280 mm; Width (mm):300; Basic dynamic load rating (C):26910 kN; Weight:319 Kg; Size (mm):420x600x300; D:600 mm; r min.:1,5 mm; d:420 mm; r1 min.:4 mm; Bearing number:GEH420XT-2RS; B:300 mm; |
No. | Brand | d | M | R | X | c | P | U | D |
3R16-265N3 | Rotek | 35 mm | - | - | - | - | - | - | 62 mm |
161.25.1120.890.11.1503 | Standard 5 | 95 mm | - | - | - | - | - | - | 170 mm |
232.20.0600.013 Type 21/750.2 | Standard 5 | 15 mm | - | - | - | - | - | - | 35 mm |
282.30.1000.013 Type 110/1200.2 | Standard 5 | 12.5000 in | - | - | - | - | - | - | 16.6250 in |
3R16-245N1 | Rotek | 30 mm | - | 16 mm | - | - | 64 mm | - | - |
162.20.0450.890.11.1503 | Standard 5 | 300 mm | - | - | - | - | - | - | 380 mm |
230.20.0400.013 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | 28,575 mm |
250.15.0375.013 Type 13/4 | Standard 5 | 150 mm | - | - | - | - | - | - | 230 mm |
60.20.0544.575.01.1403 | Standard 5 | 139,7 mm | - | - | - | - | - | - | 187,325 mm |
62.25.1077.308.11.1504 | Standard 5 | 100 mm | - | - | - | - | - | - | 140 mm |
161.20.0560.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 14.1250 in |
62.20.0560.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
60.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
162.16.0560.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.20.0755.001.21.1504 | Standard 5 | 800 mm | - | - | - | - | - | - | 1150 mm |
161.25.0980.891.21.1503 | Standard 5 | 17 mm | - | - | - | - | - | - | 40 mm |
12.20.1085.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | 22 mm |
60.20.0744.575.01.1403 | Standard 5 | 63,5 mm | - | - | - | - | - | - | 120 mm |
232.21.0575.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | - |
230.21.1075.013 Type 21/1200. | Standard 5 | 59,500 mm | - | - | - | - | - | - | 90,000 mm |
161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings Video