| 3R6-79N9 Rotek Slewing Ring Bearings | P150°:44.5 kN; N1:19.05 mm; PosiTrac Plus contact element:2 x B10724-44; Cap bolt:2 x 5/8-11 UNC; Labyrinth ring:2 x LOR 43; Appropriate attachment bolt size G:0.625 in; S:4.763 mm; J min.:244.475 mm; L:330.2 mm; Cap bolt, SAE grade:8; P180°:52.5 kN; H1:88.9 mm; RG:3/8 NPT; R1:53.181 mm; P60°:138 kN; A1:88.9 mm; Ca:42.799 mm; h:31.75 mm; da:66.675 mm; PG:1/8 NPT; |
| A14-43P1 Rotek Slewing Ring Bearings | A1:149.225 mm; H1:152.4 mm; H2:60.325 mm; Labyrinth ring:2 x LOR 120; P150°:105 kN; RG:3/4 NPT; Mass pillow block:94.3 kg; PG:1/4 NPT; P180°:127 kN; Ca:77.8 mm; End plug (suffix Y):EPR 27; S:4.763 mm; Initial grease fill:481.95 g; Cap bolt:3/4-10 UNC; L:511.175 mm; ba:61.119 mm; Housing:SSAFS 528; H:298.45 mm; Da:250 mm; Pa:28.5 kN; |
| A14-56P1E Rotek Slewing Ring Bearings | Specific dynamic load factor K:80 N/mm²; Lubricant:Maintenance free &nd; B:335 mm; b:35 mm; Design (sliding contact surface combination):Steel/PTFE FRP; rb max.:6 mm; Basic dynamic load rating C:15000 kN; Material constant KM:1055; dk:875 mm; da min.:766 mm; b1:35 mm; C:280 mm; α:3 °; M:13 mm; d:750 mm; Mass plain bearing:728 kg; Basic static load rating C0:22400 kN; Sealing solution:-; ra max.:3 mm; |
| A8-19E5A Rotek Slewing Ring Bearings | PG:1/4 NPT; Pa:10.2 kN; Cap bolt, SAE grade:5; J max.:333.375 mm; h:42.069 mm; ba:38.894 mm; L:387.35 mm; Ca:55.804 mm; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:900 r/min; R1:58.737 mm; J min.:295.275 mm; A1:111.125 mm; H1:114.3 mm; H2:44.45 mm; P120°:44.5 kN; Da:180 mm; P60°:119 kN; P150°:40 kN; Initial grease fill:365.71 g; |
| A12-34P2B Rotek Slewing Ring Bearings | B3:3 mm; Associated spanner:HN 16; Axial static load carrying capacity:173 kN; Grub (set) screw size:M8; d3:105 mm; d1:93 mm; B:18 mm; h:3.5 mm; Recommended grub screw tightening torque:18 N·m; b:8 mm; Mass lock nut:0.49 kg; G:M 80x2; |
| A16-67P2 Rotek Slewing Ring Bearings | Fillet Radius ra:3.00 mm; Basic Radial Load Rating-Dynamic DC:351000 N; d:140.000 mm; Type:300-RDM Series (from; Speed Rating-Open and Shielded-Oil OSO:7300 rpm; B:62.00 mm; Speed Rating-Open and Shielded-Grease OSG:4800 rpm; D:300.0000 mm; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Static SCO:400000 N; |
| W13-51P1D Rotek Slewing Ring Bearings | r1,2 min.:1.1 mm; da min.:57 mm; Limiting value e:0.2; s max.:1.5 mm; Limiting speed:14000 r/min; D1 ≈:77.95 mm; Basic static load rating C0:69.5 kN; rb max.:1 mm; F:59.5 mm; B:20 mm; ra max.:1 mm; Fatigue load limit Pu:8.8 kN; Reference speed:8500 r/min; Da max.:82.4 mm; D:90 mm; Calculation factor kr:0.23; Mass bearing:0.55 kg; d:50 mm; r3,4 min.:1.1 mm; da max.:57.5 mm; |
| A6-9P4 Rotek Slewing Ring Bearings | r1,2 min.:1.5 mm; Attainable speed for grease lubrication:9000 r/min; Mass bearing:1.16 kg; Calculation factor f2D:1.09; ra max.:1.5 mm; r3,4 min.:1 mm; Static axial stiffness, preload class C:198 N/µm; Da max.:133 mm; d1:105.4 mm; Basic static load rating C0:76.5 kN; Reference grease quantity Gref:15 cm³; Static axial stiffness, preload class D:287 N/µm; D:140 mm; D1:124.6 mm; Calculation factor f2C:1.05; |