| H7-43N1 Rotek Slewing Ring Bearings | Eye bolt, size:2 x M 36; bc:208.5 mm; d2:601 mm; N4 max.:30 mm; ATK:530 mm; Q150°:2400 kN; P90°:3900 kN; Taconite seal:2 x TK 96; P0°:6100 kN; J:870 mm; Mass housing:460 kg; P180°:3200 kN; P120°:2900 kN; End cover:ETS 96; ba min.:146 mm; Locating ring:2 x FRB 22/620; J1:220 mm; Initial grease fill, 20%:7 kg; |
| L9-49N9Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:2920 kN; Calculation factor e:0.2; ra max.:5 mm; Limiting speed:200 r/min; E:1165 mm; D1 ≈:1148 mm; Da max.:1197 mm; Reference speed:160 r/min; B:100 mm; s max.:12 mm; d1 ≈:1073 mm; da min.:1023 mm; r1,2 min.:6 mm; Fatigue load limit Pu:455 kN; Db max.:1197 mm; das:1063 mm; Calculation factor Y:0.6; D:1220 mm; d:1000 mm; Basic static load rating C0:7500 kN; |
| S16-100E1 Rotek Slewing Ring Bearings | d:65.000 mm; Oil Speed Rating n2:4300 rpm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Basic Static Radial Load Rating Co:108000 N; B:58.70 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:138000 N; Accessories:No Shield, no Seal,; Fillet Radius ra:2.00 mm; |
| L6-37E9Z Rotek Slewing Ring Bearings | Hydraulic nut:HMVC 28E; Sleeve:S 128x4.7/8; Mass adapter sleeve assembly:5.9 kg; B:24.079 mm; Threads per inch:12; d:140 mm; B1:134.95 mm; G:139.624 mm; d3 max.:180.315 mm; d1:123.825 mm; B4:23.012 mm; |
| R8-35N3 Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:12700 N; Oil Speed Rating n2:14000 rpm; Accessories:No Shield, no Seal; Grease Speed Rating n1:11000 rpm; D:47.0000 mm; B:22.20 mm; Basic Dynamic Radial Load Rating C:21600 N; Sealed Speed Rating n3:11000 rpm; d:17.000 mm; Fillet Radius ra:1.00 mm; |
| 3R8-98N9 Rotek Slewing Ring Bearings | da max.:95 mm; Cb min.:7.5 mm; C:36.512 mm; Limiting speed:4300 r/min; Da max.:137.5 mm; rb max.:3.3 mm; B:46.672 mm; Ca min.:8 mm; Basic dynamic load rating C:351 kN; Calculation factor e:0.33; db min.:96.5 mm; d:82.55 mm; Basic static load rating C0:405 kN; Reference speed:3600 r/min; a:31.781 mm; Da min.:130 mm; Calculation factor Y:1.8; Fatigue load limit Pu:46.5 kN; d1 ≈:113.2 mm; Db min.:142 mm; |
| R8-49E3 Rotek Slewing Ring Bearings | H2:66.675 mm; P180°:145 kN; ba:69.85 mm; Housing:SAFS 038 KA; Mass pillow block:121 kg; Da:289.999 mm; da:176.213 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:813.5 N·m; J min.:441.325 mm; P150°:120 kN; End plug (suffix Y):EPR 21; L:558.8 mm; Ca:89.789 mm; A2:225.425 mm; Cap bolt, SAE grade:8; Bearing limiting speed:2400 r/min; Pa:42.9 kN; R1:104.775 mm; P60°:345 kN; |
| W17-108P1 Rotek Slewing Ring Bearings | Mass plain bearing:0.54 kg; d:31.75 mm; α:8 °; b:4.8 mm; Basic dynamic load rating C:186 kN; Da min.:52.3 mm; Basic static load rating C0:375 kN; dk:54.737 mm; r2 min.:1 mm; Material constant KM:330; Lubricant:Maintenance free &nd; Specific dynamic load factor K:150 N/mm²; rb max.:1 mm; Design (sliding contact surface combination):Steel/steel; r1 min.:1 mm; ra max.:1 mm; M:4 mm; D:61.913 mm; |