| S8-50E1 Rotek Slewing Ring Bearings | Calculation factor Y0:1.8; Thrust factor K:1.58; Comparative radial load rating CF:1800 kN; d:609.6 mm; D1 ≈:735 mm; Calculation factor Y1:1.8; Calculation factor e:0.37; Calculation factor Y2:2.7; Mass bearing:430 kg; Basic static load rating C0:18600 kN; B:361.95 mm; T:361.95 mm; Fatigue load limit Pu:1370 kN; Design variant/feature:TQOS/GWISI; r1,2 min.:3.3 mm; D:787.4 mm; r3,4 min.:6.4 mm; |
| A16-86P1 Rotek Slewing Ring Bearings | Fatigue load limit Pu:19.3 kN; r1,2 min.:5 mm; B:90 mm; Da max.:582 mm; ra max.:4 mm; Limiting speed:1100 r/min; d2 ≈:441 mm; d:400 mm; da min.:418 mm; Calculation factor X:0.35; Basic dynamic load rating C:527 kN; Calculation factor e:1.14; Calculation factor Y2:0.57; Reference speed:1000 r/min; Db max.:591 mm; D:600 mm; Calculation factor A:17.5; rb max.:2 mm; Calculation factor kr:0.083; r3,4 min.:2 mm; |
| L6-16E9Z Rotek Slewing Ring Bearings | d:240.000 mm; Grease Speed Rating Open/Shielded n1:1800 rpm; D:320.0000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:159000 N; Accessories:Two Seals; Basic Static Radial Load Rating Co:196000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1100 rpm; Oil Speed Rating Open/Shielded n2:2200 rpm; |
| R8-30N3 Rotek Slewing Ring Bearings | B1:109.906 mm; B:28.042 mm; B4:30.963 mm; d3 max.:209.677 mm; Threads per inch:8; Hydraulic nut:HMVC 36E; d:180 mm; Sleeve:S 3036x6.3/8; d1:161.925 mm; Mass adapter sleeve assembly:6.8 kg; G:179.476 mm; |
| 3R6-49E9 Rotek Slewing Ring Bearings | ba max.:238 mm; L:1170 mm; Initial grease fill, 20%:10 kg; Taconite seal:2 x TK 30/530; P90°:4600 kN; Mass housing:700 kg; Initial grease fill, 40%:15 kg; Appropriate attachment bolt, rec. tightening torque:3640 N·m; Cap bolt, size:M 42x280; P55°:9600 kN; Locating ring:2 x FRB 10/680; H:810 mm; J1:260 mm; N4 max.:35 mm; Eye bolt, size:2 x M 42; N1:48 mm; P180°:3800 kN; Labyrinth seal:2 x TS 530; |
| 3R8-98E9 Rotek Slewing Ring Bearings | db min.:117 mm; Reference speed:2800 r/min; Basic static load rating C0:585 kN; r1,2 min.:2 mm; Calculation factor Y0:2.2; D:180 mm; Da max.:169 mm; Calculation factor Y2:3.4; D1 ≈:157 mm; K:4.5 mm; d1:100 mm; da max.:126 mm; Basic dynamic load rating C:450 kN; Fatigue load limit Pu:61 kN; Mass bearing + sleeve:7.7 kg; B:56 mm; B4:21 mm; Ba min.:7 mm; Limiting speed:3600 r/min; Calculation factor e:0.3; |
| L6-29P9Z Rotek Slewing Ring Bearings | J min.:244.475 mm; H1:88.9 mm; Da:140 mm; Housing:FSAF 613; P180°:23.1 kN; Ca:57.785 mm; Cap bolt, SAE grade:8; H:167.481 mm; Pa:6.49 kN; N1:19.05 mm; PG:1/8 NPT; Labyrinth ring:2 x LOR 33; Cap bolt:2 x 5/8-11 UNC; A2:134.938 mm; Initial grease fill:175.77 g; Stabilizing ring:2 x SR-1613; A1:88.9 mm; R2:21.431 mm; H2:31.75 mm; RG:3/8 NPT; |
| L6-43E9ZD Rotek Slewing Ring Bearings | d:45 mm; F:55 mm; Mass inner ring:0.13 kg; r, r1,2 min.:1 mm; B:22 mm; |