A16-53E1A Rotek Slewing Ring Bearings
| Brand Name |
Rotek |
| Model Number |
A16-53E1A |
| Min.Order Quantity |
1 pcs |
| Price |
Negotiable |
Product Features
| A12-47N3E Rotek Slewing Ring Bearings | Da max.:80 mm; Angle between holes in outer ring (Pitch) α:30 °; Frictional moment:1.3 N·m; Required attachment bolt size (DIN 912):M8; Static moment stiffness:880 N·m/mrad; Static axial stiffnes:1240 N/µm; a:135 mm; da min.:56 mm; d2:62.1 mm; d:40 mm; D:115 mm; Attainable speed:2000 r/min; r1,2 min.:0.6 mm; Mass bearing:2.6 kg; ra max.:0.6 mm; Basic dynamic load rating C:80 kN; |
| 3R6-71P9 Rotek Slewing Ring Bearings | α:6 °; Basic static load rating C0:1270 kN; Sealing solution:Triple-lip seals; Lubricant:Maintenance free &nd; Design (sliding contact surface combination):Steel/PTFE fabric; C:52.375 mm; Specific dynamic load factor K:150 N/mm²; r2 min.:1 mm; Basic dynamic load rating C:630 kN; da min.:75.2 mm; r1 min.:0.6 mm; rb max.:1 mm; ra max.:0.6 mm; D:111.125 mm; Da max.:104.2 mm; dk:100.33 mm; d:69.85 mm; |
| R9-55N3 Rotek Slewing Ring Bearings | Db1:87 mm; Thread grub screw G2:M6; Housing material:Cast iron; A1:13 mm; N4:4 mm; N:14 mm; Da:106.4 mm; Db2:95 mm; d:36.513 mm; L:118 mm; J6:106 mm; Hexagonal key size for grub screw N:3 mm; A:34.5 mm; B1:39.5 mm; J:92 mm; A5:22 mm; Recommended diameter for attachment bolts, inch G:0.5 in; s1:24.3 mm; Recommended tightening torque for grub screw:7.4 N·m; T:45.3 mm; |
| H8-54N1 Rotek Slewing Ring Bearings | J max.:463.55 mm; P90°:236 kN; Cap bolt recommended tightening torque:813.5 N·m; Taconite seal:TER 127; da:134.938 mm; Eye bolt:2 x 3/8-16 UNC; H2:63.5 mm; Da:269.999 mm; J min.:431.8 mm; Appropriate attachment bolt size G:1 in; Stabilizing ring:SR-30-0; Initial grease fill:623.7 g; RG:3/4 NPT; Mass pillow block:115 kg; H1:160.325 mm; R2:39.688 mm; ba:65.088 mm; S:4.763 mm; Cap bolt, SAE grade:8; |
| A8-19E5A Rotek Slewing Ring Bearings | PG:1/4 NPT; Pa:10.2 kN; Cap bolt, SAE grade:5; J max.:333.375 mm; h:42.069 mm; ba:38.894 mm; L:387.35 mm; Ca:55.804 mm; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:900 r/min; R1:58.737 mm; J min.:295.275 mm; A1:111.125 mm; H1:114.3 mm; H2:44.45 mm; P120°:44.5 kN; Da:180 mm; P60°:119 kN; P150°:40 kN; Initial grease fill:365.71 g; |
| 3R10-88N2B Rotek Slewing Ring Bearings | w:24 mm; l7 min.:24 mm; dk:29 mm; d4 ≈:28 mm; G:M 20x1.5; l5 ≈:16 mm; r1 min.:0.3 mm; Basic dynamic load rating C:44 kN; Material constant KM:330; l4 max.:106 mm; Basic static load rating C0:57 kN; d2 max.:54 mm; α:9 °; d:20 mm; C1 max.:13.5 mm; Mass rod end:0.34 kg; B:16 mm; h1:77 mm; l3 min.:30 mm; Specific dynamic load factor K:150 N/mm²; |
| 3R8-88N9 Rotek Slewing Ring Bearings | B:17 mm; Mass housing washer:0.5 kg; D1:78 mm; D:160 mm; r1,2 min.:2 mm; |
| A16-86P1 Rotek Slewing Ring Bearings | Fatigue load limit Pu:19.3 kN; r1,2 min.:5 mm; B:90 mm; Da max.:582 mm; ra max.:4 mm; Limiting speed:1100 r/min; d2 ≈:441 mm; d:400 mm; da min.:418 mm; Calculation factor X:0.35; Basic dynamic load rating C:527 kN; Calculation factor e:1.14; Calculation factor Y2:0.57; Reference speed:1000 r/min; Db max.:591 mm; D:600 mm; Calculation factor A:17.5; rb max.:2 mm; Calculation factor kr:0.083; r3,4 min.:2 mm; |
| No. | Brand | T | F | M | d | E | N | H | U |
| R11-79E3 | Rotek | - | - | - | 800 mm | - | - | 90 mm | - |
| 3R6-55N9 | Rotek | - | - | - | - | - | - | 187.325 mm | - |
| L6-16E9ZD | Rotek | - | - | - | - | - | - | 157.162 mm | - |
| L9-38E9Z | Rotek | - | - | - | - | - | - | - | - |
| R8-35N3 | Rotek | - | - | - | 17.000 mm | - | - | - | - |
| RKS. 512080101001 | SKF | - | - | - | 14 mm | - | - | - | - |
| A18-80N1 | Rotek | 53.3 mm | - | - | - | - | - | 156 mm | - |
| S16-100E1 | Rotek | - | - | - | 65.000 mm | - | - | - | - |
| 3R8-98E9 | Rotek | - | - | - | - | - | - | - | - |
| A8-17P1DU | Rotek | - | - | - | 8.000 mm | - | - | - | - |
| A8-17N4D | Rotek | 32 mm | - | - | - | - | - | - | - |
| R8-42E3 | Rotek | - | - | - | 50.8 mm | - | - | - | - |
| 3R10-85N2A | Rotek | - | - | - | 300.000 mm | - | - | - | - |
| 3R8-79N9 | Rotek | - | - | - | 14 mm | - | - | - | - |
| L6-37P9Z | Rotek | - | - | - | 560 mm | - | - | - | - |
| A12-27E3 | Rotek | - | - | - | 75 mm | - | - | - | - |
| A16-56N5 | Rotek | - | - | - | 90.000 mm | - | - | - | - |
| M5-30P1Z | Rotek | - | - | - | - | - | - | 217.488 mm | - |
| M4-34P4Z | Rotek | - | 615 mm | - | 529.91 mm | - | - | - | - |
| R8-30N3 | Rotek | - | - | - | 180 mm | - | - | - | - |
| L9-57N9Z | Rotek | 56.7 mm | - | - | 44.45 mm | - | - | 178.5 mm | - |
| A14-47N5A | Rotek | - | - | - | - | - | - | - | - |
| L4-17P8ZD | Rotek | - | - | - | 220.000 mm | - | - | - | - |
| A6-9E1B | Rotek | - | - | - | 190.000 mm | - | - | - | - |
| R8-49N3 | Rotek | - | - | - | 440 mm | - | - | - | - |
| M4-16P4 | Rotek | - | - | - | - | - | - | 298.45 mm | - |
A16-53E1A Rotek Slewing Ring Bearings Video