| M5-38P1Z Rotek Slewing Ring Bearings | Mass bearing:110 kg; Basic dynamic load rating C:2550 kN; Design variant/feature:TQOS/GWISI; Basic static load rating C0:6400 kN; Calculation factor Y0:1.4; D1 ≈:420 mm; Calculation factor e:0.48; D:457.098 mm; B:254 mm; r3,4 min.:3.3 mm; T:254 mm; Calculation factor Y1:1.4; Fatigue load limit Pu:540 kN; Thrust factor K:1.23; Comparative axial load rating CFa:166 kN; Comparative radial load rating CF:710 kN; |
| A9-54N2 Rotek Slewing Ring Bearings | A1:122.237 mm; Limiting speed:2100 r/min; A6:31.75 mm; N1:23.813 mm; Attachment bolt diameter G:22.225 mm; Mass bearing unit:30.9 kg; d2:152.4 mm; Basic dynamic load rating C:311 kN; s:41.275 mm; B:116.681 mm; L:247.65 mm; S:0.794 mm; A:88.9 mm; J:196.85 mm; a:5.556 mm; da:101.6 mm; A5:46.831 mm; |
| A14-54N10C Rotek Slewing Ring Bearings | Thrust factor K:1.76; Calculation factor Y1:2; Comparative radial load rating CF:1860 kN; d1 ≈:566 mm; B:400 mm; Basic dynamic load rating C:7480 kN; r3,4 min.:5 mm; Comparative axial load rating CFa:301 kN; d:540 mm; Calculation factor Y2:3; Mass bearing:372 kg; Calculation factor Y0:2; Design variant/feature:TQON/GW; Calculation factor e:0.33; D:690 mm; r1,2 min.:2 mm; Basic static load rating C0:21200 kN; |
| L6-37E9ZD Rotek Slewing Ring Bearings | A:33 mm; Limiting speed:1200 r/min; B:38.1 mm; T:42.2 mm; Recommended tightening torque for grub screw:4 N·m; N:12.3 mm; A5:20 mm; Hexagonal key size for grub screw N:3 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Basic static load rating C0:11.2 kN; s1:22.2 mm; Basic dynamic load rating C:19.5 kN; J:82.5 mm; Db:78 mm; Da:93.7 mm; A3:3.2 mm; Housing material:Composite; Thread grub screw G2:M6x0.75; |
| L9-46E9Z Rotek Slewing Ring Bearings | A2:311.15 mm; Labyrinth ring:2 x LOR 178; Appropriate attachment bolt size G:1.5 in; L:831.85 mm; Initial grease fill:2749.95 g; Ca:117.805 mm; N1:41.275 mm; J max.:708.025 mm; Da:399.999 mm; P60°:691 kN; H1:241.3 mm; RG:1 NPT; R2:46.831 mm; Max. speed for PosiTrac Plus seal:600 r/min; J1:133.35 mm; End plug (suffix Y):X-5217-2; PG:1/4 NPT; P90°:414 kN; Housing:SAFS 052 KA; Cap bolt recommended tightening torque:4284.4 N·m; |
| A8-41E1 Rotek Slewing Ring Bearings | Pu:3.430 kN; H:14 mm; rs (min):0.6 mm; Oil:5 000 min-1; static Cor:75.500 kN; D1:52 mm; d:50 mm; D:70 mm; dynamic Cr:32.260 kN; Grease:3 800 min-1; d1:70 mm; |
| A6-14E1 Rotek Slewing Ring Bearings | L:711.2 mm; h:57.15 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; da:198.438 mm; Cap bolt recommended tightening torque:1735.4 N·m; R1:120.65 mm; PG:1/4 NPT; P60°:416 kN; A1:190.5 mm; P150°:136 kN; P180°:160 kN; Mass pillow block:214 kg; Cap bolt:1 1/8-7 UNC; RG:1 NPT; Da:339.999 mm; Cap bolt, SAE grade:8; Stabilizing ring:2 x 36053-140; P90°:249 kN; Pa:59.6 kN; |
| R11-71N3 Rotek Slewing Ring Bearings | Da:76.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Fatigue load limit Pu:0.475 kN; Recommended diameter for attachment bolts, mm G:10 mm; Thread grub screw G2:M8x1; B1:48.4 mm; B4:5.95 mm; Db:78 mm; A5:20 mm; J:116.5 mm; L:83 mm; A3:3.2 mm; T:50.1 mm; Hexagonal key size for grub screw N:4 mm; Limiting speed:1200 r/min; H:142.5 mm; d:30 mm; Basic dynamic load rating C:19.5 kN; s1:30.1 mm; |