| L6-37P9Z Rotek Slewing Ring Bearings | Design (sliding contact surface combination):Steel/PTFE FRP; Material constant KM:1055; b:27 mm; D:750 mm; da min.:572 mm; C:215 mm; r1 min.:2 mm; b1:27 mm; Basic static load rating C0:12700 kN; Da min.:638.5 mm; ra max.:2 mm; da max.:602 mm; α:4 °; Lubricant:Maintenance free &nd; rb max.:5 mm; Basic dynamic load rating C:8500 kN; Specific static load factor K0:120 N/mm²; d:560 mm; Mass plain bearing:312 kg; |
| 3R13-62N1E Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:3400 N; D:35.0000 mm; Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:8060 N; Grease Speed Rating Open/Shielded n1:20000 rpm; Fillet Radius ra:0.64 mm; Accessories:Two Shields; Grease Speed Rating n1:20000 rpm; d:10.000 mm; B:11.00 mm; Oil Speed Rating Open/Shielded n2:26000 rpm; Oil Speed Rating n2:26000 rpm; |
| R11-75E3 Rotek Slewing Ring Bearings | H2:41.275 mm; J1:47.625 mm; Limiting speed:3800 r/min; da:61.913 mm; S:0.794 mm; B:65.484 mm; L:266.7 mm; J max.:225.425 mm; H1:69.85 mm; s:32.941 mm; Basic dynamic load rating C:193 kN; J min.:209.55 mm; H:144.463 mm; A:88.9 mm; Attachment bolt diameter G:15.875 mm; Mass bearing unit:8.62 kg; |
| W13-35P1 Rotek Slewing Ring Bearings | Basic static load rating C0:10800 kN; b:16.7 mm; K:9 mm; B:350 mm; Fatigue load limit Pu:1020 kN; D:480 mm; F:364 mm; D1 ≈:425.35 mm; Basic dynamic load rating C:5390 kN; Mass bearing:220 kg; α:20 °; r3,4 min.:1.5 mm; C:350 mm; d:320 mm; r1,2 min.:10 mm; Design variant/feature:BC4.10/W33WI; |
| M4-16P4 Rotek Slewing Ring Bearings | PosiTrac Plus contact element:2 x B10724-122; L:511.175 mm; Labyrinth ring:2 x LOR 122; Pa:28.5 kN; H:298.45 mm; Stabilizing ring:SR-28-0; Da:250 mm; Ca:77.8 mm; Mass pillow block:94.3 kg; Initial grease fill:481.95 g; P60°:301 kN; Cap bolt recommended tightening torque:515.2 N·m; R1:87.313 mm; Housing:SSAFS 528; A1:149.225 mm; S:4.763 mm; RG:3/4 NPT; da:125.412 mm; h:51.594 mm; P120°:116 kN; |
| A6-14E1 Rotek Slewing Ring Bearings | L:711.2 mm; h:57.15 mm; Max. speed for Taconite seal:385 r/min; Eye bolt:2 x 1/2-13 UNC; da:198.438 mm; Cap bolt recommended tightening torque:1735.4 N·m; R1:120.65 mm; PG:1/4 NPT; P60°:416 kN; A1:190.5 mm; P150°:136 kN; P180°:160 kN; Mass pillow block:214 kg; Cap bolt:1 1/8-7 UNC; RG:1 NPT; Da:339.999 mm; Cap bolt, SAE grade:8; Stabilizing ring:2 x 36053-140; P90°:249 kN; Pa:59.6 kN; |
| A20-72N5A Rotek Slewing Ring Bearings | Cap bolt, SAE grade:8; Labyrinth ring (db shaft position):LOR 89; R2:22.225 mm; Cap bolt:2 x 5/8-11 UNC; dc:80.963 mm; P90°:47.2 kN; A1:88.9 mm; A2:127 mm; Labyrinth ring (dc shaft position):LOR 63; PosiTrac Plus contact element (db shaft position):B10724-89; H:187.325 mm; P180°:32 kN; S:4.763 mm; Stabilizing ring:SR-17-14; PosiTrac Plus contact element (dc shaft position):B10724-64; Pa:20.5 kN; |
| A14-49P1A Rotek Slewing Ring Bearings | s max.:6 mm; d:90 mm; Mass bearing:9.46 kg; Limiting value e:0.3; r3,4 min.:3 mm; D:190 mm; Calculation factor kr:0.25; D1 ≈:161.1 mm; da max.:110 mm; r1,2 min.:3 mm; db min.:116 mm; Reference speed:3800 r/min; Limiting speed:4500 r/min; Fatigue load limit Pu:65.5 kN; F:113.5 mm; Basic static load rating C0:540 kN; Da max.:175.3 mm; B:64 mm; Basic dynamic load rating C:500 kN; da min.:104 mm; |