| A18-80N1 Rotek Slewing Ring Bearings | Db1:88 mm; Basic static load rating C0:15.3 kN; Fatigue load limit Pu:0.655 kN; B4:6.75 mm; J7:15 mm; A1:13 mm; Recommended diameter for attachment bolts, inch G:0.5 in; H:156 mm; T:53.3 mm; s1:32.3 mm; Basic dynamic load rating C:25.5 kN; Hexagonal key size for grub screw N:5 mm; Recommended tightening torque for grub screw:16.5 N·m; Db2:96 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:12 mm; |
| M4-38P4Z Rotek Slewing Ring Bearings | Specific static load factor K0:300 N/mm²; Mass plain bearing:3.1 kg; D:120.65 mm; α:6 °; da min.:81.4 mm; rb max.:1 mm; M:6.5 mm; r1 min.:0.6 mm; Material constant KM:330; b1:8 mm; r2 min.:1 mm; Specific dynamic load factor K:100 N/mm²; C:57.15 mm; d:76.2 mm; dk:109.525 mm; ra max.:0.6 mm; Basic dynamic load rating C:500 kN; Design (sliding contact surface combination):Steel/steel; Basic static load rating C0:1500 kN; |
| 3R8-79N9 Rotek Slewing Ring Bearings | Specific static load factor K0:20 N/mm²; B:14 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; D:20 mm; d:14 mm; Mass bushing:0.015 kg; |
| L6-29E9Z Rotek Slewing Ring Bearings | Fw:120 mm; Basic static load rating C0:176 kN; Mass needle roller and cage assembly:0.17 kg; Limiting speed:4000 r/min; U:24 mm; Reference speed:3400 r/min; Fatigue load limit Pu:20.4 kN; Ew:127 mm; Basic dynamic load rating C:56.1 kN; |
| L6-25N9ZD Rotek Slewing Ring Bearings | Static axial stiffnes:470 N/µm; Preload:720 N; ra max.:0.3 mm; Attainable speed:4300 r/min; r1,2 min.:0.3 mm; D2:38.1 mm; Number of attachment bolts:5; Fatigue load limit Pu:1.4 kN; Required attachment bolt size (DIN 912):M6; Basic dynamic load rating C:21.2 kN; Mass bearing:0.45 kg; r3,4 min.:0.6 mm; da min.:23 mm; Static moment stiffness:80 N·m/mrad; Da max.:37 mm; d2:28.7 mm; H1:17 mm; |
| R8-46E3 Rotek Slewing Ring Bearings | dk:80 mm; h1:175 mm; α:6 °; Mass rod end:7.1 kg; d4 ≈:82 mm; l5 ≈:35 mm; d:60 mm; l4 max.:246 mm; Material constant KM:330; G:M 52x3; B:44 mm; C1 max.:39 mm; d2 max.:137 mm; Specific dynamic load factor K:100 N/mm²; l3 min.:70 mm; r1 min.:1 mm; l7 min.:70 mm; w:70 mm; Basic dynamic load rating C:245 kN; Basic static load rating C0:400 kN; |
| A14-25P1 Rotek Slewing Ring Bearings | a:18.877 mm; Mass bearing:0.38 kg; d1 ≈:52.3 mm; Basic static load rating C0:69.5 kN; Ca min.:3 mm; Limiting speed:10000 r/min; Da min.:54 mm; T:22.225 mm; Fatigue load limit Pu:7.8 kN; Basic dynamic load rating C:67.1 kN; B:22.28 mm; Cb min.:4.5 mm; r3,4 min.:1.6 mm; da max.:41 mm; db min.:40 mm; C:17.462 mm; Db min.:64 mm; d:33.338 mm; Calculation factor Y:1.1; Reference speed:8000 r/min; |
| A18-89P1 Rotek Slewing Ring Bearings | R1:65.088 mm; ba:51.594 mm; Ca:70.104 mm; J min.:295.275 mm; L:387.35 mm; S:4.763 mm; H2:44.45 mm; Taconite seal:2 x TER 101; R2:30.163 mm; Da:180 mm; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; P120°:44.5 kN; PG:1/4 NPT; da:85.725 mm; Initial grease fill:181.44 g; Bearing:23220 CCK/W33; P60°:119 kN; P180°:48.9 kN; H1:114.3 mm; |