M5-22P1Z Rotek Slewing Ring Bearings

A12-22E2 Rotek Slewing Ring Bearings	Initial grease fill:793.8 g; Bearing limiting speed:2800 r/min; Stabilizing ring:SR-32-0; P60°:345 kN; Mass pillow block:132 kg; R1:104.775 mm; PG:1/4 NPT; P120°:133 kN; P180°:145 kN; Pa:38.5 kN; RG:3/4 NPT; H1:169.875 mm; Labyrinth ring:2 x LOR 131; Housing:SSAFS 532; Eye bolt:2 x 3/8-16 UNC; A1:158.75 mm; Cap bolt recommended tightening torque:813.5 N·m; Cap bolt:7/8-9 UNC; Ca:89.789 mm;
A9-25N3 Rotek Slewing Ring Bearings	A5:28.8 mm; Basic static load rating C0:15.3 kN; H1:47.6 mm; Thread grub screw G2:5/16-24 UNF; Housing material:Composite for food a; J:82.6 mm; L:110 mm; Limiting speed:3200 r/min; Mass bearing unit:0.78 kg; Thread length G1:12 mm; A1:32.5 mm; d:31.75 mm; s1:25.4 mm; Recommended tightening torque for grub screw:6.5 N·m; H:95 mm; Hexagonal key size for grub screw N:3.969 mm; Fatigue load limit Pu:0.655 kN;
M5-16P1 Rotek Slewing Ring Bearings	d:100.000 mm; D:215.0000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:2500 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:194000 N; Basic Static Radial Load Rating Co:212000 N; B:47.00 mm; Fillet Radius ra:2.50 mm;
H7-43N1 Rotek Slewing Ring Bearings	Eye bolt, size:2 x M 36; bc:208.5 mm; d2:601 mm; N4 max.:30 mm; ATK:530 mm; Q150°:2400 kN; P90°:3900 kN; Taconite seal:2 x TK 96; P0°:6100 kN; J:870 mm; Mass housing:460 kg; P180°:3200 kN; P120°:2900 kN; End cover:ETS 96; ba min.:146 mm; Locating ring:2 x FRB 22/620; J1:220 mm; Initial grease fill, 20%:7 kg;
3R10-98P9 Rotek Slewing Ring Bearings	Basic dynamic load rating C:30 kN; h:78 mm; l1 min.:43 mm; l2 max.:107 mm; d:20 mm; Specific dynamic load factor K:100 N/mm²; G:M 20x1.5; α:9 °; dk:29 mm; Material constant KM:330; C1 max.:13.5 mm; l7 min.:24 mm; B:16 mm; d2 max.:54 mm; Mass rod end:0.32 kg; r1 min.:0.3 mm; Basic static load rating C0:42.5 kN;
3R6-49P9 Rotek Slewing Ring Bearings	Cap bolt, SAE grade:8; H1:82.55 mm; ba:29.369 mm; Appropriate attachment bolt size G:0.5 in; h:38.1 mm; A2:123.825 mm; Cap bolt:2 x 1/2-13 UNC; Contact seal:2 x B9784-19; H2:30.163 mm; Ventilation fitting:38174-12; da:49.212 mm; Stabilizing ring:2 x SR-1611; R2:25.4 mm; Max. speed for contact seal:2950 r/min; P180°:14.2 kN; R1:44.45 mm; Mass pillow block:12.4 kg; H:157.162 mm; P60°:35.6 kN;
W14-71P1 Rotek Slewing Ring Bearings	Basic Radial Load Rating-Static SCO:77600 lbf; Basic Interchange NDH:-; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 309; Basic Interchange NSK:-; Basic Interchange MCGILL:BB850; Basic Radial Load Rating-Dynamic DC:19600 lbf; Basic Interchange:-; Basic Interchange BCA:MG309DD;
L6-22N9ZD Rotek Slewing Ring Bearings	r2 min.:1 mm; C:20 mm; da min.:33.7 mm; M:2.5 mm; Mass plain bearing:0.35 kg; Specific static load factor K0:500 N/mm²; rb max.:1 mm; D:55 mm; Da max.:50.9 mm; Sealing solution:Triple-lip seals; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:400 kN; d:30 mm; B:32 mm; b1:3.9 mm; Basic dynamic load rating C:80 kN; ra max.:0.6 mm; r1 min.:0.6 mm; b:3.9 mm; Material constant KM:330;

No.	Brand	T	F	M	d	E	N	H	U
A14-54N10C	Rotek	400 mm	-	-	540 mm	-	-	-	-
L9-57P9Z	Rotek	-	-	-	130.000 mm	-	-	-	-
A6-14E1	Rotek	-	-	-	-	-	-	-	-
A12-22E2	Rotek	-	-	-	-	-	-	-	-
3R10-98P9	Rotek	-	-	-	20 mm	-	-	-	-
A8-17P1DU	Rotek	-	-	-	8.000 mm	-	-	-	-
A12-32P2	Rotek	-	-	-	-	-	-	-	-
M4-38P4Z	Rotek	-	-	6.5 mm	76.2 mm	-	-	-	-
A12-48E12	Rotek	-	-	-	70.000 mm	-	-	-	-
3R13-62N1E	Rotek	-	-	-	10.000 mm	-	-	-	-
M5-31P1Z	Rotek	-	-	-	-	-	-	-	-
3R6-49N9	Rotek	-	-	-	440 mm	-	-	-	-
L6-22P9Z	Rotek	-	-	-	45.000 mm	-	-	-	-
L9-53P9Z	Rotek	-	-	-	160 mm	-	-	-	-
A14-33N1	Rotek	-	-	-	85 mm	-	-	53.1 mm	-
M4-34P4Z	Rotek	-	615 mm	-	529.91 mm	-	-	-	-
L6-33E9Z	Rotek	-	-	-	-	-	-	495.3 mm	-
3R5-44P2A	Rotek	-	100 mm	-	85 mm	-	-	-	-
L6-37E9Z	Rotek	-	-	-	140 mm	-	-	-	-
L6-43E9Z	Rotek	-	-	-	75.000 mm	-	-	-	-
L9-49E9Z	Rotek	-	-	-	-	-	-	-	-

Brand Name	Rotek
Model Number	M5-22P1Z
Min.Order Quantity	1 pcs
Price	Negotiable

Product Features

M5-22P1Z Rotek Slewing Ring Bearings Video