| W13-24P1 Rotek Slewing Ring Bearings | Sealed Speed Rating n3:1900 rpm; Fillet Radius ra:2.50 mm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:234000 N; B:77.80 mm; Accessories:Two Shields; Oil Speed Rating n2:2800 rpm; d:95.000 mm; Grease Speed Rating n1:1900 rpm; Basic Static Radial Load Rating Co:224000 N; |
| R9-67N3 Rotek Slewing Ring Bearings | Limiting speed:1100 r/min; L:118 mm; J6:106 mm; J:92 mm; A:34.5 mm; Recommended tightening torque for grub screw:16.5 N·m; N4:4 mm; B1:51.1 mm; s1:32.3 mm; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:25.5 kN; Da:106.4 mm; d:34.925 mm; RG:1/4-28 UNF; Housing:FY 507 M/VZ033; Recommended diameter for attachment bolts, inch G:0.5 in; |
| A12-47N3E Rotek Slewing Ring Bearings | Da max.:80 mm; Angle between holes in outer ring (Pitch) α:30 °; Frictional moment:1.3 N·m; Required attachment bolt size (DIN 912):M8; Static moment stiffness:880 N·m/mrad; Static axial stiffnes:1240 N/µm; a:135 mm; da min.:56 mm; d2:62.1 mm; d:40 mm; D:115 mm; Attainable speed:2000 r/min; r1,2 min.:0.6 mm; Mass bearing:2.6 kg; ra max.:0.6 mm; Basic dynamic load rating C:80 kN; |
| W13-51P1D Rotek Slewing Ring Bearings | r1,2 min.:1.1 mm; da min.:57 mm; Limiting value e:0.2; s max.:1.5 mm; Limiting speed:14000 r/min; D1 ≈:77.95 mm; Basic static load rating C0:69.5 kN; rb max.:1 mm; F:59.5 mm; B:20 mm; ra max.:1 mm; Fatigue load limit Pu:8.8 kN; Reference speed:8500 r/min; Da max.:82.4 mm; D:90 mm; Calculation factor kr:0.23; Mass bearing:0.55 kg; d:50 mm; r3,4 min.:1.1 mm; da max.:57.5 mm; |
| A13-38E1 Rotek Slewing Ring Bearings | H:419.1 mm; Labyrinth ring:2 x LOR 513; A2:295.275 mm; R1:122.237 mm; Cap bolt, SAE grade:8; Cap bolt:1 1/4-7 UNC; N1:34.925 mm; h:56.356 mm; A1:203.2 mm; ba:89.694 mm; Stabilizing ring:2 x A8897; Da:359.999 mm; J max.:635 mm; Eye bolt:2 x 1/2-13 UNC; PG:1/4 NPT; End plug (suffix Y):X-5217-4; P180°:222 kN; Housing:SAFS 048 KA; Cap bolt recommended tightening torque:2467.6 N·m; J min.:571.5 mm; |
| A16-86P1 Rotek Slewing Ring Bearings | Fatigue load limit Pu:19.3 kN; r1,2 min.:5 mm; B:90 mm; Da max.:582 mm; ra max.:4 mm; Limiting speed:1100 r/min; d2 ≈:441 mm; d:400 mm; da min.:418 mm; Calculation factor X:0.35; Basic dynamic load rating C:527 kN; Calculation factor e:1.14; Calculation factor Y2:0.57; Reference speed:1000 r/min; Db max.:591 mm; D:600 mm; Calculation factor A:17.5; rb max.:2 mm; Calculation factor kr:0.083; r3,4 min.:2 mm; |
| A24-119E11A Rotek Slewing Ring Bearings | Mass bearing + sleeve:8.85 kg; Calculation factor e:0.22; d2 ≈:169 mm; B2 ≈:77 mm; B1:72 mm; Calculation factor Y1:3; Limiting speed:3200 r/min; Calculation factor Y2:4.6; K:4.5 mm; b:8.3 mm; D:225 mm; ra max.:2 mm; B:56 mm; da min.:157 mm; Basic static load rating C0:750 kN; Calculation factor Y0:2.8; Reference speed:2400 r/min; d1:145 mm; G:M 160x3; G1:15 mm; |
| M5-30P1 Rotek Slewing Ring Bearings | d1 ≈:590 mm; ra max.:4 mm; Basic dynamic load rating C:2380 kN; da min.:548 mm; Reference speed:850 r/min; d:530 mm; r1,2 min.:5 mm; Limiting value e:0.3; Fatigue load limit Pu:390 kN; Limiting speed:1100 r/min; Axial load factor Y:0.4; D1 ≈:656 mm; Calculation factor kr:0.15; F:573 mm; Mass bearing:130 kg; Basic static load rating C0:5000 kN; Da max.:692 mm; D:710 mm; db min.:595 mm; |