| M5-36P1Z Rotek Slewing Ring Bearings | Housing:FYTB 507 M/VZ033; J6:106 mm; H:156 mm; J:130 mm; R1:22 mm; Db1:88 mm; Hexagonal key size for grub screw N:3.175 mm; A1:13 mm; L:96 mm; B4:6 mm; Recommended diameter for attachment bolts, mm G:12 mm; Da:88.9 mm; A:34.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Thread grub screw G2:1/4-28 UNF; J7:15 mm; B:42.9 mm; Recommended tightening torque for grub screw:4 N·m; |
| A8-22N2A Rotek Slewing Ring Bearings | d:8 mm; da:10 min; Bearing designation:608 ; Static (Cor):1.356 kN; ra:0.3 max; B:7 mm; Da:20 max; rs:0.3 mm; Pu:0.062 kN; Oil:42 000 min-1; Dynamic (Cr):3.282 kN; D:22 mm; Grease:35 000 min-1; Weight:0.015 kg; |
| A12-47N3E Rotek Slewing Ring Bearings | Da max.:80 mm; Angle between holes in outer ring (Pitch) α:30 °; Frictional moment:1.3 N·m; Required attachment bolt size (DIN 912):M8; Static moment stiffness:880 N·m/mrad; Static axial stiffnes:1240 N/µm; a:135 mm; da min.:56 mm; d2:62.1 mm; d:40 mm; D:115 mm; Attainable speed:2000 r/min; r1,2 min.:0.6 mm; Mass bearing:2.6 kg; ra max.:0.6 mm; Basic dynamic load rating C:80 kN; |
| A18-46E4D Rotek Slewing Ring Bearings | α:3 °; Specific dynamic load factor K:300 N/mm²; Specific static load factor K0:500 N/mm²; rb max.:6 mm; Basic dynamic load rating C:65500 kN; D:1000 mm; B:335 mm; Da min.:865 mm; Sealing solution:Double-lip seals; Da max.:950 mm; r2 min.:6 mm; C:280 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:784 mm; Basic static load rating C0:110000 kN; Mass plain bearing:777 kg; |
| R8-42E3 Rotek Slewing Ring Bearings | da max.:62.5 mm; Da max.:75.9 mm; ra max.:1 mm; da min.:56.5 mm; α:9 °; D:80.963 mm; Basic static load rating C0:670 kN; Specific dynamic load factor K:100 N/mm²; Design (sliding contact surface combination):Steel/steel; d1 ≈:62.484 mm; Sealing solution:-; d:50.8 mm; Material constant KM:330; dk:73.025 mm; Mass plain bearing:1.2 kg; C:38.1 mm; b:4.8 mm; rb max.:1 mm; Basic dynamic load rating C:224 kN; |
| 3R6-49P9 Rotek Slewing Ring Bearings | Cap bolt, SAE grade:8; H1:82.55 mm; ba:29.369 mm; Appropriate attachment bolt size G:0.5 in; h:38.1 mm; A2:123.825 mm; Cap bolt:2 x 1/2-13 UNC; Contact seal:2 x B9784-19; H2:30.163 mm; Ventilation fitting:38174-12; da:49.212 mm; Stabilizing ring:2 x SR-1611; R2:25.4 mm; Max. speed for contact seal:2950 r/min; P180°:14.2 kN; R1:44.45 mm; Mass pillow block:12.4 kg; H:157.162 mm; P60°:35.6 kN; |
| M5-30P1Z Rotek Slewing Ring Bearings | End plug (suffix Y):EPR 12; Appropriate attachment bolt size G:0.875 in; H:217.488 mm; Labyrinth ring:2 x LOR 102; H1:114.3 mm; ba:38.894 mm; PG:1/4 NPT; R1:58.737 mm; da:87.313 mm; A1:111.125 mm; Stabilizing ring:2 x SR-1520; h:42.069 mm; Da:180 mm; P150°:46.3 kN; Housing:SAF 520; Cap bolt recommended tightening torque:203.4 N·m; Mass pillow block:28.1 kg; P180°:55.6 kN; J min.:295.275 mm; |
| S8-56E1 Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, mm G:12 mm; B:42.9 mm; Basic dynamic load rating C:25.5 kN; A1:17 mm; N:14.8 mm; Recommended tightening torque for grub screw:6.5 N·m; J:92 mm; A:35 mm; s1:25.4 mm; Basic static load rating C0:15.3 kN; T:46.4 mm; d:31.75 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Bearing:YAR 207-104-2RF/VE49; Limiting speed:3200 r/min; A5:32 mm; Thread grub screw G2:5/16-24 UNF; |