| Kobelco SK100-4 Hydraulic Final Drive Motor | Da max:256 mm; r1a max:1 mm; Max operating temperature, Tmax:120 °C; ra max:2.5 mm; Characteristic outer ring frequency, BPF0:6.93 Hz; D1:223.5 mm; Characteristic inner ring frequency, BPFI:9.06 Hz; D:270 mm; Nref:3,100 rpm; Min operating temperature, Tmin:-40 °C; |
| Kobelco SK235SR-1ES Hydraulic Final Drive Motor | Fatigue limit load, Cu:0.16 kN; Brand:NTN; f0:12.7; Characteristic outer ring frequency, BPF0:2.61 Hz; Characteristic inner ring frequency, BPFI:4.39 Hz; Nlim (grease):19,000 rpm; B:11 mm; d:15 mm; Characteristic rolling element frequency, BSF:3.68 Hz; rs min:0.6 mm; |
| Kobelco SK27SR-5 Hydraulic Final Drive Motor | Radial clearance class:C3; da max:20 mm; Static load, C0:3.6 kN; B:11 mm; Mass:0.04 kg; rs min:0.6 mm; Brand:NTN; f0:12.7; da min:19 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; |
| Kobelco SK30SR Hydraulic Final Drive Motor | Dynamic load, C:2,200 kN; Characteristic cage frequency, FTF:0.42 Hz; Characteristic outer ring frequency, BPF0:7.08 Hz; Max operating temperature, Tmax:200 °C; Y0:2.04; Radial clearance class:CN Special; e:0.32; Number of lubrication holes:3; d:170 mm; d2:236 mm; |
| Kobelco SK300-4 Hydraulic Final Drive Motor | Designation of bearing:UK208G2H-22; L:130 mm; T min.:-20 °C; B:29 mm; Designation of housing:F208-; A1:15 mm; T max.:100 °C; J:102 mm; e:21 mm; G:M6x1; |
| Kobelco SK120LC-5 Hydraulic Final Drive Motor | Seals or Shields:Open Type; Static Load Rating (kN):4.55; D:35mm; Oil Limiting Speed (r/min):64000; Availability:In Stock; Clearance:Standard; SKU:7202cyu/glp4-nachi; B:11mm; d:15mm; Dynamic Load Rating (kN):8.7; |
| Kobelco SK025-2 Hydraulic Final Drive Motor | da max:105 mm; ra max:2 mm; da min:99 mm; Nlim (grease):4,300 rpm; Characteristic inner ring frequency, BPFI:9.15 Hz; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.43 Hz; Brand:NTN; B:30 mm; r1s min:2 mm; |
| Kobelco LQ15V00007F1 Hydraulic Final Drive Motor | J:48 mm; H1:10 mm; H2:57 mm; Recommended tightening torque for set screw:3.5 Nm; S:6 mm; E:9 mm; L:70 mm; T max.:200 °C; H:30.2 mm; Z:14 mm; |